Perle S-1000MM Gigabit Media Converters
S-1000MM Gigabit Media Converters
1000Base-SX to 1000Base-X Fiber Mode Conversion
1000Base-SX to 1000Base-X Fiber to Fiber Media Converters
- Multimode to multimode or multimode to single mode
- Extend multimode fiber to 160km and beyond ( through cascading )
- Choice in SC, LC and ST fiber connector models
- Signal regeneration prevents signal degradation
- Advanced Features: Smart Link Pass-Through, Fiber Fault Alert, loopback for each fiber connection
Perle’s feature rich S-1000MM Gigabit Fiber to Fiber Media Converters enable transparent fiber extension of 1000Base-SX multimode fiber to 1000Base-SX multimode or 1000Base-LX/EX/ZX/BX single mode fiber.
Perle’s advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. In addition, a lifetime warranty and free worldwide technical support make Perle’s S-1000MM Gigabit Fiber to Fiber Media Converters the smart choice for IT professionals.
Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-1000MM Gigabit Fiber to Fiber Media Converters to meet your fiber conversion requirement.
S-1000MM Fiber to Fiber Features: 1000Base-SX to 1000Base-X
| Auto-Negotiation (802.3ab) | The 1000Base-X fiber interfaces negotiate according to 802.3 clause 37. |
| Smart Link Pass-Through | When the Link Mode switch is placed into Smart Link Pass-Through mode, the 1000BASE-X link on one port will reflect the state of the other 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled. |
| Fiber Fault Alert | With Fiber Fault Alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters. Applies only when fiber auto-negotiation is disabled. |
| Signal Regeneration | Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation. |
| Cascading | Media converters can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances. |
| Pause (IEEE 802.3xy) | Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter is transparent to Pause frames. |
| VLAN | The media converter is transparent to 802.1Q VLAN tagged packets. |
| Duplex | Full and half duplex operation supported. |
| Jumbo Packets | Transparent to jumbo packets up to 10KB. |
| Remote Loopback | The media converter can perform a loopback on each 1000Base-X fiber interface. |
| Brands | Perle |
|---|---|
| Industries & Applications | Industrial, IT & Data Centre, Security |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Industrial Switches , Solution & Services
Lantronix SISTG1040-242 – Unmanaged Industrial Gig Switch (8 Port)
Industrial Switches , Solution & ServicesLantronix SISTG1040-242 – Unmanaged Industrial Gig Switch (8 Port)
Unmanaged Hardened Gigabit Ethernet Switch
(4) 10/100/1000Base-T Ports + (2) 100/1000Base-X SFP SlotsThis switch is an unmanaged full Gigabit Ethernet hardened switch that has (4) 10/100/1000Base-T ports with (2) 100/1000 dual speed SFP slots. The SISTG1040-242-LRT can be used at the edge of a hardened network to provide Gigabit Ethernet connections in hazardous locations.
SKU: n/a -
Industrial Switches , Solution & Services
Perle IDS-105G – Industrial Gigabit Switch (5 Port)
5 to 7 Port Compact DIN Rail Switch
- 5 port 10/100/1000Base-T ( RJ45 )
- 5 port 10/100/1000Base-T ( RJ45 ) with 1 or 2 Gigabit fiber ports ( SC/ST/SFP )
- Hazardous Location and Industrial Control Equipment Certification
- Corrosion resistant IP30 aluminum case
- Redundant dual power input 12/24/48 VDC, 18 to 30 VAC
- Overload current and reverse polarity protection
- Industrial operating temperature support up to -40 to 75C
SKU: n/a -
Console Servers, Device Management, Solution & Services
Lantronix LM83X
System
- Management interfaces: Supports up to 104 devices via serial (RS-232); Two 10/100/1000 BaseT Ethernet interfaces (with failover support) and one RS-232 console port; One SFP port
- On-board storage: 256GB NVMe supporting TCG Opal 2.0, 256-bit AES encryption
- Peripheral connectivity: One USB-A port, one USB-C port
- One option slot (RS232; V.92, cellular, and fiber cards available)
- Three expansion slots for 8-Port and 16-Port Serial cards; 8-Port Ethernet card (10/100/1000 Mbps; LCD keypad
Dimensions and Weight
- Height, Width and Depth: 43.2 mm
(1.7 in.) x 445 mm (17.5 in.) x 264 mm (10.4 in.); 1 rack unit (1RU) - Weight: 3.72 kg (8.2 lbs.)
SKU: n/a -
Industrial Switches , Solution & Services
Perle IDS-108F – Industrial Switch ( 8 Port)
- 8 port 10/100Base-TX ( RJ45 )
- 8 port 10/100Base-TX ( RJ45 ) plus 1 or 2 SC/ST fiber ports
- Hazardous Location and Industrial Control Equipment Certification
- Corrosion resistant IP30 aluminum case
- Redundant dual power input 12/24/48 VDC, 18 to 30 VAC
- Overload current and reverse polarity protection
- Industrial operating temperature support up to -40 to 75 °C.
SKU: n/a
There are no reviews yet.